Description

Heavy Duty Skid Plate KTM-2310

The Emperor Heavy Duty Skid Plate, in our opinion, is the best skid plate available on the market today. With a 3/16″ thick aluminum construction, hand Tig welded wings with an Emperor scorpion logo carved into each side for bling factor, aluminum mounting brackets and high-grade metric fasteners, you simply can’t go wrong. It also comes with 1/4″ thick x 3/4″ wide foam tape to place between the frame and skid plate for a nice snug fit that will eliminate any possible vibrations. And to complete the ultimate package, a block of open cell foam is also supplied to place between the skid plate and the engine to reduce the build up of material between the skid plate and engine case. This is the perfect product for the hard core off road rider.

Product Features:

• MANUFACTURED OUT OF HIGH GRADE 3/16″ ALUMINUM
• BOTH SIDE AND BOTTOM PROTECTION AGAINST IMPACT
• ALUMINUM MACHINED BRACKETS
• FOAM TAPE TO PUT BETWEEN THE FRAME AND SKID PLATE FOR A NICE SNUG VIBRATION-FREE FIT
• OPEN CELL FOAM TO PUT BETWEEN THE SKID PLATE AND ENGINE CASE TO ELIMINATE THE BUILD UP OF DIRT AND MUD
• METRIC HARDWARE
• EMPEROR SCORPION LOGO ENGRAVED IN EACH SIDE FOR THE BLING FACTOR
• WEIGHS 3LBS/1.4KGS
• PROUDLY MADE IN CANADA

Plastic (UHMW) Performance Slip Liner WITH beaver tail link guard KTM-2311

Slide over rocks and logs with ease while at the same time protecting your suspension linkage. This product can be used with or without the Emperor Racing linkage guard or with any other brand of aluminum linkage guard.

Product Features:
> BOLTS TO HD SKID PLATE KTM-2310

> MANUFACTURED OUT OF 1/4” BLACK, ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMW)

> PROTECTS THE REAR SUSPENSION LINKAGE

> COMES WITH ALL THE HARDWARE TO COMPLETE THE INSTALLATION (ALL METRIC BOLTS WITH NYLOCK NUTS, SO NO WORRIES ABOUT IT COMING LOOSE)

> CAN BE USED WITH OR WITHOUT EMPEROR RACING LINKAGE GUARD

> WEIGHS 1LB/.5KG

> EASY TO INSTALL

PROUDLY MADE IN CANADA

KTM-2315 Billet Rad Guard

Do you want the best protection for your bike without having to worry about trimming plastic, complicated installation, making your bike feel wider, fitting over-sized rads, fuel tanks or fan kits? Check out our new patent-pending, one-piece Billet Radiator Guard.
Machined out of 1/4″ T6 aluminum, coupled with the patent-pending one piece design, we believe this is the strongest option on the market today for front, side and falling backwards protection.

Watch Taco Moto’s tech tip:

Product Features:

• MACHINED OUT OF HIGH GRADE 1/4″ T6 ALUMINUM
• EXCELLENT SIDE PROTECTION AGAINST IMPACT
• ONE-PIECE DESIGN
• FRAME DOWN TUBE BACK SUPPORT
• WILL FIT WITH MOST OF THE SMALLER OVER-SIZED FUEL CELLS, OVER-SIZED RADIATORS AND COOLING FAN KITS
• DOES NOT MAKE SHROUDS STICK OUT MORE THEN STOCK
• METRIC HARDWARE
• NO PLASTIC TRIMMING REQUIRED
• INSTALL IN 30 MINUTES
• POWDER COATED BLACK
• WEIGHS 2.5 LBS/1.1 KGS
• PROUDLY MADE IN CANADA

KTM-2315 IS NOT COMPATIBLE WITH AFTERMARKET IMS 4.5 GAL FUEL TANK.   OTHER BRAND TANKS THAT COME UP THE SIDE OF THE RADIATOR LIKE THIS IMS LIKELY WILL ALSO NOT WORK WITHOUT MODIFICATIONS.